EasyManua.ls Logo

Baumatic BRCF1855SL - Specific Maintenance Tasks

Baumatic BRCF1855SL
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
o After washing the appliance, wipe over the area that you have
cleaned with a damp cloth and then dry it thoroughly.
o When cleaning is complete, dry your hands and then reconnect
the plug to your mains supply.
Replacing the light bulb
WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM YOUR
MAINS SUPPLY BEFORE ATTEMPTING TO
REPLACE THE LIGHT BULB.
o Remove all adjustable shelves for your safety before changing
the light bulb.
o Hold and gently lift up the light bulb cover to allow access to the
bulb.
o Remove the old bulb by unscrewing it in an anti-clockwise
direction.
o Replace with a new bulb of the same type (15W) by screwing it
in a clockwise direction. Take care to ensure that the bulb is fully
secured in the bulb holder.
o Refit the light bulb cover and reconnect your appliance to the
mains supply and turn on.
The defrost drain hole
o Defrosting occurs automatically in the refrigerator section during
operation. The defrost water is collected by the evaporating tray
and evaporates automatically.
o The drain hole should be cleaned periodically with a drain hole
cleaner. This will prevent water from collecting in the bottom of
the refrigerator, instead of flowing down the defrost drainage
channel and drain hole.
o IMPORTANT: Please note that the drain hole cleaner should not
be left in position permanently. Otherwise this may prevent the
defrost water from entering the drain hole.
o You can also pour a small amount of water down the drain hole
to clean the defrost drainage channel.

Related product manuals