22
The green and yellow wire must be connected to the terminal
marked “E” (earth), or by the earth symbol, or coloured green
and yellow.
o When the connection is completed, no stray strands or cut wire
should be present. The cord clamp must be secured over the
outer sheath.
Reversing the door swing
o You can choose whether you want the doors of your appliance to
open from the left or the right according to your kitchen design
or personal preference.
o It is important that this procedure is carried out before the
fridge-freezer is positioned in the desired location. The
appliance should not be connected to the mains supply.
o The door reversal process should only be carried out a suitably
qualified person. It is recommended that 2 people handle the
fridge-freezer during assembly. All parts that are removed
should be saved for reinstallation.
o The fridge-freezer should be rested on something solid so that it
will not slip during the door reversal process. Do not lay the
fridge-freezer flat as this may damage the coolant system.
o The tools which are required to carry out the door reversal
process are a Philips style screwdriver, a flat bladed screwdriver
and a hexagonal spanner.
To Next Page
Loading...
