14
Starting a Washing
Programme
Once you have selected the
programme and temperatures you
need for your wash, press this
button to start your washing
machine.
Note:
• The button will stick up in the ‘out’ position.
• The ‘ON’ light will come on after a few
seconds.
• The door safety mechanism will engage at this
time.
THEN, run the programme you have
selected by pressing the ‘ON/OFF’ button.
Interrupting a Programme
You can interrupt a program me at any time
by pressing the ‘STOP/START’ button.
Simply do this and wait two minutes if you
have to add or remove garments. Be
careful that the water level inside the drum
is not too high and that the temperature is
not very hot.
Once you have closed the door once again,
simply press the ‘ON/OFF’ button once
again. The programme will pick up where it
had left off.
To Next Page
Loading...
