Setting the temperature
o When the appliance is connected to your mains supply, the
power ON light will switch on.
o Use the temperature control dial to set the temperature within
the wine cooler.
o If you set the control dial to the word “Low”, then the wine
cooler will achieve a lower temperature.
o If you set the control dial to the word “Med”, then the wine
cooler will achieve a midpoint temperature (BW28BL only).
o If you set the control dial to the word “High”, then the wine
cooler will achieve a higher temperature.
o The wine cooler can achieve a temperature of between 10°C and
18°C.
o IMPORTANT: On the BW28BL, there is no interior light on the
temperature control dial. The light is positioned in the roof of the
wine cooler on this model.
12
To Next Page
Loading...
