23
4) Pull the harness wires one by
one out of the upper right
hinge hole through its gap and
remove the upper right hinge.
5) Tidy the harness and carefully
push it back into the door frame
and cover it with the right door
corner cover.
6) Insert a flat blade screwdriver
into the groove of the left door
corner cover and prize it up.
7) Slowly pull out the harness at the left
door corner, which must be pulled through
no longer than 90 mm to avoid loosening
the inside terminals. Insert the harness
wires one by one into the upper left hinge
hole through its gaps.
To Next Page
Loading...
