12
o The temperature will increase by 1°C or 1°F if you touch the plus
button once and will decrease by the same amount of you press
the minus button once.
o When you set a new temperature for either of the zones, the
display will show this temperature for 5 minutes before showing
the actual zone temperature. During this time, the zone
temperature will adjust accordingly.
o To view the set temperature in both zones at any time, press the
plus or minus button. The display will flash the temperature for 5
seconds.
IMPORTANT: When the temperature of a zone is changed, the
compressor works harder to reach the required temperature.
During this time, the side panels of the wine cabinet can reach
up to 45°C however they will cool down when the set
temperature is reached.
Changing between Fahrenheit and Celsius
o You can select whether the temperature displays show Celsius or
Fahrenheit.
o To alter what the temperature displays are showing, press the
light control button (1) for 5 seconds.
o You cannot change the display if you are in the process of
adjusting the temperature of a cooling zone.
The humidity control box (optional)
The wine cabinet is equipped with a system for maintaining the correct
level of humidity for wine storage.
o Fill the small plastic reservoir (humidity box) ¾ full with water
and replace. The humidity box is located on the top shelf
and secured by runners.
o Check the water level regularly and refill as necessary.
o IMPORTANT: Please ensure the reservoir is positioned
correctly on the runners to avoid the possibility of water
spillage.
To Next Page
Loading...
