Accessory installation before operating
UNPACKING AND CLEANING THE WINE COOLER
• Make sure that it has been installed by a suitably qualified person, as
per the information contained in Baumatic’s installation instructions.
• Let the appliance stand upright for approximately 2 hours before
connecting it to the mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
• The outside of the appliance and the removable accessories contained
within it, should be cleaned with a solution of liquid detergent and
water.
• The interior of the appliance should be cleaned with a solution of
sodium bicarbonate dissolved in lukewarm water. The interior and
accessories should be thoroughly dried, after the cleaning process has
been completed.
• There can be an odour when you first switch on the appliance. It will
lessen as the appliance starts to cool.
LOCK & UNLOCK THE DOOR (OPTION)
●
Your Wine Cabinet has a lock for the door and a key should be
attached inside the packing of this User Manual.
●
Insert the key into the lock and turn it counter-clockwise to unlock
the door. To lock it, please follow the reversed operation. Please save
the key well.
To Next Page
Loading...
