Baumatic BWE40 - Troubleshooting Guide; Common Symptoms and Solutions

Your Baumatic BWE40 Wine Cooler
16
Troubleshooting –
If you are having a problem with your Wine
Cooler, please check it against the table below
before calling for service.
Symptoms Possible
Cause
Solutions
- No power supply
- Make sure it’s plugged
in.
- Low voltage - Ensure normal voltage.
- Circuit breaker
tripped
- Flick the breaker
switch back on.
Your Wine Cooler is
Not Working!
-Fuse Blown - Change fuse.
- Your cooler is too
close to another heat
source.
- Keep the wine cooler
away from direct
sunlight or other heat
sources.
- The door gasket does
not seal properly
- Make sure the seals
aren’t damaged & that
you can close the door
properly.
- The door is not
completely shut
- Ensure nothing is
forcing the door open
from within.
- The door has been
opened too frequently,
left open too long, or
was not closed tightly
- Close the door tightly
and leave shut for a
while. Do not open the
door too frequently
afterwards.
Not Cold Enough!
- Your Wine Cooler’s
running temperature
may be too high
- Check the temperature
adjustor & set to a
cooler temperature.
LL error code showing
- The temperature in
your wine cooler is too
low.
- Increase the temperature
in the wine cooler, using
the relevant button on the
control panel.