EasyManua.ls Logo

Baumatic CAN52.4ME - Carbon Filter Installation; Fitting Carbon Filters

Baumatic CAN52.4ME
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
T: Defective bulbs should be replaced immediately.
are fitted
before you call for technical
o Refit the grease filter.
e
b
FORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
o You will find that one filter will attach over the front of the fan
e replaced at least every
four months depending on usage to allow normal operation when
E (1 x pair ST1 carbon filters)
o Remove the grease filters.
o Insert a new identical 40W (max) bulb.
o IMPORTAN
o If the lights still do no
properly into their housings
assistance.
t work, make sure that the bulbs
Fitting the carbon filter
If the applianc
necessary to a
odours caused
is going to be used in recirculation mode then it is
fit a carbon filter. This will help to absorb unpleasant
y cooking.
IMPORTANT: BE
ENSURE THAT YOU HAVE DISCONNECTED THE
COOKER HOOD FROM YOUR MAINS SUPPLY.
motor. The active carbon filter must b
in recirculation mode.
CAN52.4M

Related product manuals