Baumatic CAN52.4ME - The Grease Filter

15
2) Hook the carbon filter over the
pins that are located at the end of
the motor.
) Turn the carbon filter clockwise until you feel it latch
nto the motor’s sides.
grease filters.
w the steps outlined above
and turn the carbon filter anti-clockwise to unlatch it from the
motor.
CAN75.3SS (1 x pair S1 carbon filters)
) Remove the grease filters (as described
reviously).
) Hook the carbon filter over
he pins that are located at the
nd of the motor.
3
o
4) Replace the
o When replacing the carbon filter, follo
1
p
2
t
e