o The frame around the cooking function symbol will flash, to
confirm the cooking function, press the joystick control knob
again.
o If you do not confirm the cooking function within 20 seconds, the
oven will reset itself and the ON/OFF segment will light.
o If you do not touch the joystick control knob for a further 20
seconds, the oven will switch off automatically.
Adjusting the oven temperature
o Each cooking function has a preset temperature assigned to it.
However it is possible to adjust the oven temperature.
o Once you have confirmed the cooking function that you require,
turn the joystick control knob until the oven temperature
segment (TEMP) is lit.
o Press the joystick control knob once to select the TEMP segment.
o Turn the joystick control knob to increase or decrease the oven
temperature. The temperature will adjust in 5°C increments and
appear on the oven temperature display (2).
o You can adjust the temperature between 50 and 250°C.
o When the temperature that you require appears on the oven
temperature display (2), you should stop turning the joystick
control knob.
o Press the joystick control knob once to confirm the temperature.
If you do not turn the joystick control knob for more than 5
seconds, the temperature will confirm automatically.
o Whilst the oven is heating to the temperature that you have set,
the letter “C” and the “°” symbol will flash. When these symbols
remain fixed, the oven has reached temperature.
o You should not place food inside of the oven cavity until the
appliance has reached the temperature that you set.
o IMPORTANT: For the PRH (preheating) and ETC (cleaning)
functions, it is not possible to adjust the temperature.
14
To Next Page
Loading...
