27
Installing the oven into the kitchen cabinet
ositioning th
o Ensure that the aperture that you will be fitting the oven into is
of the size given in the above diagram.
o The oven must be fitted into an oven housing with the ventilation
o The side panels of the kitchen unit(s) must be full length and go
o If your kitchen units are on legs, then you must fit full length
the installation process.
P e appliance
cut-outs shown in the “Ventilation requirements” section on page
30.
o Ensure that the rear panel of the furniture housing unit has been
removed.
all the way down to the floor.
side panels to the side of the units that the support brackets will
screw into, before commencing
To Next Page
Loading...
