Cleaning your cooker hood
IMPORTANT: BEFORE CLEANING, ALWAYS ENSURE
THAT YOU HAVE SWITCHED YOUR COOKER HOOD
OFF
AT THE OMNI-POLAR SWITCH, SET AT THE
WALL FROM THE CABLE.
Cleaning
o Clean the external parts of your cooker hood with mild liquid
detergent and a new damp cloth.
o Never use abrasive powder, corrosive solvents or brushes.
o Never insert pointed objects into the motor’s protective grid.
o If you are using the appliance in recirculation mode, then be
sure to replace the carbon filters at the recommended interval
(see section on “Fitting the carbon filter”). A build up of grease
could cause a fire hazard.
o Never attempt to clean the area above the grease filter.
o IMPORTANT: You should regularly use a good quality
stainless steel cleaner to maintain the shine and finish on
the stainless steel areas of your cooker hood. This will
help to leave a silicone water-resistant film to protect the
stainless steel surfaces and keep them in good condition
for the life of the product.
The grease filter
o Your cooker hood includes grease filters which help to absorb
grease particles to protect your kitchen and furniture from
greasy residues.
o Your cooker hood includes two metal filters which can be
periodically washed depending on usage.
o These filters may become flammable if they become saturated
with greasy residue.
o To prevent this fire hazard, the metal filters should be cleaned
regularly. Depending on use, this should be done every two
months, using hot water and normal washing-up detergent.
o DO NOT WASH THE GREASE FILTER IN A DISHWASHER.
12
To Next Page
Loading...
