8) Change the position of the pivot and cylindrical insert that sit in the
base of the oven frame.
9) Unscrew the door handle and place it on the other side of the oven
door.
o You should also reverse the position of the locking pivots.
IMPORTANT: When the above steps have been followed, it is
necessary to reassemble all of the components.
o You should pay particular attention to the wiring, it is important
to make sure that no wiring has been damaged during the door
reversal operation.
o You should ensure that all the electrical components and the
oven programmer work correctly before reassembling the covers
of the oven.
24
To Next Page
Loading...
