BAUMÜLLER
BASIC FEED UNIT
BUG 3 / 2 / 20
Technical description and operation manual
Edition March 1997
5.96064.01
PLEASE READ AND PAY ATTENTION TO SAFETY INSTRUCTIONS
AND OPERATING GUIDE PRIOR TO COMMISSIONING
This manual contains the necessary information for normal opteration of the products described
therein. The drives may only be used, maintained and repaired by personnel familiar with the operation
manual and the applicable regulations on working safety and accident prevention. The devices are
manufactured to a high technical specification and are operationally safe. Provided that all safety
instructions habe been adhered to, there will be no personal danger during the installation and
commissioning stages.
The commisioning is prohibited until it has been positively determined that the machine, into which
these components are to be incorporated, complies with EC machine regulations.
This technical description replaces and nullifies all provious description. In order to provide the best
possible service, we reserve the right to alter information without notice.
Manufacturer and Baumüller Nürnberg GmbH
Supplier's address: Ostendstr. 80
90482 Nürnberg
Germany
Tel. (++49-911) 5432 - 0 Fax (++49-911) 5432 - 130
Copyright: The technical description and the operation manual may not be copied or
duplicated without our permission.
Country of origin: Made in Germany
Date of manufacture: Determined from the serial number on the machine/motor.
To Next Page
Loading...
Need help?
General
