Need help?Do you have a question about the Baumuller BFN 3-1-0007-001 and is the answer not in the manual?
General| Brand | Baumuller |
|---|---|
| Model | BFN 3-1-0007-001 |
| Category | Power distribution unit |
| Language | English |
Provides important information on handling the device and requires compliance with safety notes and procedural instructions.
Explains the warning notes and their corresponding signal words and symbols used in the handbook.
Details the manufacturer's disclaimer for damages arising from noncompliance or improper use of the handbook.
States that the instruction handbook is confidential and its use is restricted to personnel working with the device.
Mentions that components from other manufacturers are integrated and their compliance is declared by the manufacturers.
Warns about using incorrect spare parts and advises procuring original parts from the manufacturer.
Instructs to disassemble and recycle constituent parts correctly if no take-back agreement is made.
States that devices must be operated according to stipulated methods, otherwise warranty rights are void.
Offers technical information and contact details for customer service via phone, fax, email, and internet.
Defines that terms like 'Device' or 'BFN' refer to Baumüller 'Mains filters'.
Stipulates that all personnel must read and understand the operating instructions before working with the device.
Prohibits changes or modifications to the device without explicit manufacturer approval to prevent hazards.
Warns that use beyond intended purpose or non-compliant operation can cause dangerous situations.
Outlines operator responsibilities regarding work safety regulations, risk analysis, and device operation.
Emphasizes the need for qualified personnel for specific tasks to prevent injury and material damage.
Details required personal protective equipment (PPE) such as clothing, hard hat, safety shoes, and gloves.
Identifies risks from electrical current, including danger from residual energy and stored electric charge.
Warns of fatal injury risk from electrical current during fire fighting and specifies suitable devices (ABC powder/CO2).
Stresses the importance of functional safety equipment and advises checking its condition before work.
Provides guidelines for preventive measures and proper response during emergencies like accidents or fires.
Explains symbols and signs found in the working area, including warnings for illegible symbols and electrical voltage.
Describes system types (TN, TT, IT) and requirements for power supply, including voltage, frequency, and asymmetry.
Provides detailed dimensions for various Baumüller, EPCOS, and Schaffner mains filters in millimeters.
Lists the weights of different mains filters for TN/TT-systems and IT-systems in kilograms.
Details electrical specifications like rated current, peak current, test voltage, and protection class for different filter models.
Explains mains filters as combinations of components reducing electromagnetic influence and enabling EMC compliance.
Illustrates the type plate of a Baumüller mains filter, showing model, voltage, current, and certifications.
Explains the structure of the type code for Baumüller mains filters, detailing manufacturer, filter type, and specifications.
Warns about damage from unauthorized transport by untrained personnel and advises using trained staff.
Specifies conditions to meet during transport, including maintaining the temperature range of -25°C to +85°C.
Instructs to inspect goods for completeness and damage upon receipt and file complaints if necessary.
Provides instructions for unpacking, including avoiding forceful agitation and verifying the delivery scope.
Describes packaging materials and advises compliance with national regulations for disposal.
Warns of dangers from faulty mounting, requiring qualified personnel and secure fixing of devices.
Details preparation steps including checking dimensions, ensuring air supply, and mounting on a conductive surface.
Outlines the mounting process, requiring suitable lifting equipment, fastening components, and device mounting.
Emphasizes that installation must be done by qualified personnel aware of risks and safety standards.
Stresses compliance with electrical mains requirements to avoid device damage and personal injury.
Provides requirements for selecting and connecting cables, including cross-section and temperature ratings.
Details stationary grounding conductor connection requirements and potential incompatibility with RCDs.
Discusses EMC stability, including cabling, grounding, and measures to ensure interference suppression.
Guides through the installation procedure, emphasizing electrical safety and EMC-compliant cable connection.
Presents a filter connection diagram showing power converter, power choke, main contactor, and filter connections.
Warns of fatal injury risk from electrical current and improper maintenance, stressing safe working conditions.
States the device is maintenance-free if specified environmental conditions are met, referencing relevant data.
Instructs to contact the sales office for device damage and provides contact information for Baumüller Nürnberg GmbH.
Lists spare/accessory parts and part numbers for Baumüller mains filters for mains inverter and compact units.
Provides part numbers for screening terminals based on cable diameter for grounding purposes.
Advises on proper disposal procedures, compliance with regulations, and consulting authorities if needed.
To Next Page
