Baxi 5117391 User Manual

Installation & User’s Instructions
for use with all Potterton Combination Boilers
Single Channel Wireless Programmable
Room Thermostat
Kit N
o
5117391
Please leave these Instructions
with the User.
A
B
C
D
Comp N
o
5117490 - Iss 5 - 11/06
BAXI
A Trading Division of Baxi Heating UK Ltd
Brooks House, Coventry Road, Warwick, CV34 4LL
After Sales Service 08706 096 096 Technical Enquiries 08706 049 049
Website www.potterton.co.uk
e&oe
company
WARNING: Isolate at supply before access.
1. Undo the screws securing the boiler outer case and remove the boiler outer case.
2. Undo the screws retaining the facia and hinge the facia down.
3. If there is a Receiver Cover Panel then undo the screws and remove it.
4. From inside the facia panel, spring the securing barbs of the facia blanking plate and push
through the facia to release.
5. Take the receiver from the box and fit it to the facia panel.
NOTE: Do not fit the batteries to the transmitter at this stage.
Facia
Panel
Receiver
Facia Blanking
Plate
PCB removed
for clarity
PCB
Receiver
Cover Panel
SOCKET
1
/
4
Turn Facia
Securing Screws
Facia
Panel
Receiver
Receiver
Cover Panel
Facia Blanking
Plate
1
2
3
4
br -Brown
b - Blue
r - Red
br
b
r
E
FITTING THE RECEIVER TO THE BOILER
5
Installation & User’s Instructions
for use with all Baxi Combination Boilers
Single Channel Wireless Programmable
Room Thermostat
Kit N
o
5117391
Please leave these Instructions
with the User.
Comp N
o
5117490 - Iss 1 - 12/05
Baxi Heating UK Limited
Brownedge Road Bamber Bridge Preston Lancashire PR5 6UP
After Sales Service 08706 096 096 Technical Enquiries 08706 049 049
Website www.baxi.co.uk
KIT CONTENTS IDENTIFICATION
Key No Description No Off
A Instructions 1
B Programmable Room Thermostat (Transmitter) 1
C Receiver Unit 1
D Battery (1.5VL26/AA) 2
E Screw Plastite Pozi 3

Baxi 5117391 Specifications

General

MPN	5117391
Brand	Baxi
Type	Thermostat
Compatibility	Baxi Boilers
Control Type	Digital
Power Supply	Battery
Battery Type	AA
Display	LCD
Mounting Type	Wall-mounted

Summary

Electrical Connections

3-Way Block Wiring

Connects receiver to boiler via 3-way block, using specific wire terminals.

3-Way Connector Wiring

Connects receiver using a 3-way connector and a removed link connector.

Direct Wiring to Terminal Block

Connects receiver wires directly to the 6-way terminal block.

Programmable Room Thermostat Installation

Transmitter Fitting and Battery Insertion

Steps to install the transmitter unit and correctly fit batteries.

Wireless Operating Range

Guidance on optimal placement to ensure wireless signal strength.

Recommissioning Procedure

Steps to re-link the transmitter and receiver if needed.

Programmable Room Thermostat Settings

Setting Time and Temperature

Adjusting the clock and desired room temperature using the dial.

Configuring Heating Schedules

Setting central heating ON/OFF times using tappets.

Selecting Operating Mode

Choosing between continuous, timed, or off modes.

LED Status Indicators

Understanding LED signals for room stat status and battery levels.