What to do if my Baxi Boiler has low water pressure?
If your Baxi Boiler is showing low water pressure, you should check the system pressure and restore it. Also, check the pressure of the expansion vessel and inspect the system and boiler for any leaks.
How to fix an OBD error on a Baxi 600 System 2 15?
If you're seeing an OBD error on your Baxi Boiler, this is likely due to a configuration error. To resolve this, re-enter the CN1 and CN2 values, and double-check the information shown on the data plate.
What to do if a functional device is disconnected from my Baxi Boiler?
If your Baxi Boiler displays a message indicating a functional device is disconnected, it may be due to the SCB board not being detected or a faulty SCB. First, check the connection and connectors of the SCB board. If the issue persists, the board may be faulty and require replacement.
What causes a passive functional device to be disconnected on a Baxi 600 System 2 15 Boiler?
If your Baxi Boiler shows that a passive functional device is disconnected, the cause might be that the SCB board is not detected or the SCB is faulty. You should check the connection and the connectors. If this doesn't solve the problem, replace the board.
How to resolve a connection error on a Baxi Boiler?
If your Baxi Boiler is showing a connection error, the SCB board may not be detected. You should carry out the auto-detect function to resolve this.
Why is my Baxi 600 System 2 15 Boiler showing a device priority error?
If your Baxi Boiler is showing a device priority error, it might be because the SCB board isn't being detected. To fix this, try running the auto-detect function.
What does a unit function configuration error mean on my Baxi Boiler?
If your Baxi Boiler displays a unit function configuration error, the SCB board might not be detected. You can try to fix this by running the auto-detect function.
How to fix a failed node initialisation error on a Baxi 600 System 2 15 Boiler?
If your Baxi Boiler is showing a failed node initialisation error, the SCB board may not be detected. Try running the auto-detect function to resolve this.
What to do if my Baxi 600 System 2 15 Boiler has an incorrect or missing serial number?
If your Baxi Boiler displays an error about an incorrect or missing serial number, you should replace the CU-GH board.
Why is my Baxi 600 System 2 15 Boiler not detecting the outdoor temperature sensor?
If your Baxi Boiler expects an outdoor temperature sensor but it is not detected, it may be because the outdoor sensor is not connected correctly. Connect the outdoor sensor to resolve the issue.
To Next Page
General