Need help?Do you have a question about the Baxi Megaflo System HE A Range and is the answer not in the manual?
Control for power, reset, and mode selection.
Adjusts the temperature for the central heating system.
Indicates the current water pressure within the heating system.
Displays the current temperature of the boiler water.
Information on normal operating pressure range.
Verify Central Heating System Pressure is within the normal range.
Interpret and respond to displayed error codes for fault identification.
Verify timer and room thermostat settings for proper heating operation.
Guidance on when and how to contact qualified professionals for assistance.
Details on normal pressure, identifying low pressure, and the repressurising procedure.
Guidelines for safe installation, operation, and required clearances.
Instructions for cleaning the boiler's external panels using mild methods.
Explains frost protection, system thermostat, and pump protection features.
Details on displayed error codes, their meanings, and initial actions.
Outlines legal requirements for installation, commissioning, and service engineers.
Explains the Benchmark checklist and its significance for installation and service.
Critical steps to follow immediately if a gas leak is suspected.
Guidance on using the boiler safely when a fault is present.
Instructions for shutting off gas and water at the boiler in an emergency.
Details on activating and maintaining the boiler's warranty and service requirements.
Steps to follow and information needed when experiencing issues with the boiler.
Outlines what is covered and what is not by the manufacturer's warranty.
To Next Page
General
