What causes a Baxi Boiler to display 'Flue temperature sensor short-circuited'?
If your Baxi Boiler displays 'Flue temperature sensor short-circuited', it could be due to: * Sensor not or badly connected: Check the wiring. * Bad connection: Check the sensors are operating correctly. * Sensor fault: Check the sensor has been correctly fitted and replace the sensor if necessary.
What to do if my Baxi Boiler has low system water pressure?
If your Baxi Boiler shows low system water pressure, it could be due to a water leak. Check the boiler and the entire system for any signs of leakage. You may also need to repressurize the system.
How to fix no domestic hot water in my Baxi Boiler?
If your Baxi Boiler isn't providing domestic hot water, start by ensuring the boiler is receiving power by checking the fuses and switches. Also, verify that the gas isolation cock is fully open and, if applicable, that your prepayment meter has sufficient credit. It's also possible that the DHW function is switched off, so try activating the DHW mode. Check the water pressure; if it's below 0.5 bar, re-pressurise the system. Finally, make sure the flow is at least 2.5 litres per minute.
Why are my radiators cold with my Baxi COMBI 224?
If your radiators are cold when using your Baxi Boiler, first, check the temperature set point for the heating and increase it using the CH temperature knob or your room thermostat. Make sure the heating mode is activated. Ensure that all radiator valves are open. Also, check that the boiler is receiving power by checking the fuses and switches, and verify the gas isolation cock is open. If the water pressure is too low (below 0.5 bar), re-pressurise the system.
What causes no flame during operation in a Baxi Boiler?
If there is no flame during operation in your Baxi Boiler, it could be due to several reasons: * No ionization current: Purge the gas supply to remove air. * Sensor fault: Check the gas valve is fully opened, check the supply pressure, check the operation and setting of the gas valve unit, check the air inlet and flue gas discharge flues are not blocked, check that there is no recirculation of flue gases.
What causes a Baxi COMBI 224 to display 'Flow temperature sensor open-circuited'?
If your Baxi Boiler displays 'Flow temperature sensor open-circuited', it could be due to: * Sensor not or badly connected: Check the wiring. * Bad connection: Check that the sensors are operating correctly. * Sensor fault: Check that the sensor has been correctly fitted and replace the sensor if necessary.
What causes a Baxi COMBI 224 Boiler to display 'Return temperature sensor short-circuit'?
If your Baxi Boiler displays 'Return temperature sensor short-circuit', it could be due to: * Sensor not or badly connected: Check the wiring. * Bad connection: Check that the sensors are operating correctly. * Sensor fault: Check that the sensor has been correctly fitted and replace the sensor if necessary.
What causes a Baxi COMBI 224 Boiler to display 'Flow temperature sensor short-circuited'?
If your Baxi Boiler displays 'Flow temperature sensor short-circuited', it could be due to: * Sensor not or badly connected: Check the wiring. * Bad connection: Check that the sensors are operating correctly. * Sensor fault: Check that the sensor has been correctly fitted and replace the sensor if necessary.
What to do if my Baxi COMBI 224 Boiler has no circulation?
If your Baxi Boiler has no circulation, it could be due to: * No circulation: Vent the air in the heating system. * Sensor not or badly connected: Check the water pressure and check the wiring. * Sensor fault: Check the circulation (direction, pump, valves), check the cleanliness of the heat exchanger, check that the sensors are operating correctly and replace the sensor if necessary.
How to fix no circulation of water in my Baxi COMBI 224 Boiler?
If there is no circulation of water in your Baxi Boiler, it may be due to: * Non-existent or insufficient circulation: Check circulation. * Sensor error: Check water pressure, check sensors are operating correctly, check that the sensor has been correctly fitted, check the cleanliness of the heat exchanger and check pump.
General| Model | Baxi COMBI 224 |
|---|---|
| Category | Boiler |
| Output | 24 kW |
| Dimensions | 700 x 400 x 300 mm |
| Flow Rate | 9.8 L/min |
| Fuel Type | Natural Gas |
| Boiler Type | Combi |
| Mounting | Wall-mounted |
| DHW Output | 24 kW |
General safety guidelines for appliance operation and user interaction.
Advice for proper installation, usage, and maintenance.
User obligations for safe and efficient operation.
Installer responsibilities for installation and commissioning.
Manufacturer's limited liability and product improvements.
General overview of the manual's purpose and content.
Information on optional extras and related sales literature.
Explanation of symbols used to highlight risks and important information.
Details on certifications and regulatory compliance.
Key technical information, specifications, and parameters.
Physical dimensions, connection points, and required clearances.
Overview of the Baxi Combi boiler features and capabilities.
Explanation of how the boiler functions during operation.
Description of the control panel, keys, and display elements.
List and details of available optional accessories for the boiler.
Step-by-step guide for starting up the boiler.
Procedure for checking boiler operation and identifying initial faults.
Instructions on how to use the boiler's control panel features.
Steps for safely shutting down the boiler.
Information and precautions regarding the boiler's frost protection feature.
Overview of adjustable parameters and how to read them.
Instructions for adjusting central heating and domestic hot water temperatures.
General information and recommendations for boiler maintenance.
Detailed steps for performing routine maintenance checks.
Procedure for repressurising the heating system.
Guide to removing air from radiators and the system.
Instructions for draining the central heating system.
Explanation of temporary and permanent error codes displayed by the boiler.
Guide to diagnosing and resolving common boiler problems.
Steps for safely decommissioning the boiler.
Guidelines for the proper disposal and recycling of the boiler.
Tips and advice for saving energy when using the boiler.
How room thermostats affect energy consumption and comfort.
Essential requirements for activating and maintaining the boiler warranty.
Detailed terms and conditions for the manufacturer's warranty.
Technical data summary (product fiche) for combination boilers.
Technical data summary (package fiche) for boilers.
Technical data summary for combination heaters (boilers or heat pumps).
To Next Page
