What to do if my Baxi Boiler has a flashing red light?
If your Baxi Boiler displays a flashing red light, it indicates a fault that has caused the boiler to lock out. To attempt to clear this, press the RESET button for at least 5 seconds.
Why is the green light flashing on my Baxi Heat 418 Boiler?
When your Baxi Boiler's green light is flashing, this means the boiler has detected a problem and is trying to fix it. If it cannot resolve the issue, the boiler will lock out and show a red light.
What to do if there is a continuous red light on my Baxi Boiler?
When a Baxi Boiler shows a continuous red light, contact your Installer, Annual Service Provider or Baxi Customer Support - The Service Division of Baxi, and inform them of the fault code displayed.
Critical safety advice including gas leak procedures, hazard symbols, and warnings.
Key technical data including dimensions, clearances, electrical supply, and power consumption for various models.
Procedure for checking boiler operation and identifying initial faults using flowcharts.
Interpretation of boiler status lights, fault warnings, lock-out codes, and reset procedures.
A table outlining common boiler problems and their possible causes for user diagnosis.
Essential steps for warranty activation, registration, terms, and the role of the Benchmark Checklist.
Requirements for annual service, how to contact Baxi Customer Support, and necessary information for repairs.
To Next Page
General