Baxi LUNA 1.310 Fi User Manual

High effi ciency gas fi red wall mounted system boiler
Chaudière murale à gaz à rendement élevé
User’s instructions
Notice d’emploi pour l’usager
BAXI S.p.A. , l’une des entreprises leader en Europe dans la production
d’appareils de chauffage et sanitaires à usage domestique, (chaudières
murales à gaz, chaudières au sol, chauffe-eau électriques, plaques de
chauffe en acier), a obtenu la certification CSQ de conformité aux normes
UNI EN ISO 9001. Ce certificat assure que le Système de Qualité en usage
aux usines BAXI S.p.A. de Bassano del Grappa, où l’on a produit cette
chaudière, satisfait la plus sévère des normes - c’est-à-dire la UNI EN
ISO 9001 - qui concerne tous les stades d’organisation et le personnel
intéressé du procès de production et distribution.
BAXI
S.p.A., one of the leading European enterprises to produce central
heating and hot water devices for domestic use (wall-mounted gaz-opera-
ted boilers, floor-standing boilers, electrical water-heaters and steel hea-
ting plates) has obtained the QSC certificate of conformity to the UNI
EN ISO 9001 norms. This certificate guarantees that the Quality System
applied at the BAXI S.p.A. factory in Bassano del Grappa, where your
boiler was produced, meets the standards of the UNI EN ISO 9001 norm,
which is the strictest and concerns all organization stages and operating
personnel involved in the production and distribution processes.
UNI EN ISO 9001
CERTIFICAZIONE DEI SISTEMI
QUALITA' DELLE AZIENDE
1.310 Fi

Baxi LUNA 1.310 Fi Specifications

General

Brand	Baxi
Model	LUNA 1.310 Fi
Category	Boiler
Language	English

Summary

Description

User Controls

Overview of the boiler's control panel indicators, including selector switches and neon lights.

Operating the Boiler

Temperature Control

Adjusting the central heating water temperature for optimal comfort and efficiency.

Flame Failure Reset

Procedure to reset the boiler if the burner fails to ignite or has a weak flame.

Safety Thermostat

How to reset the safety thermostat if it has shut down the boiler due to overheating.

Air Flow Monitor

Understanding the air flow monitor neon light and potential flue obstructions.

Pump Fault or Low Pressure

Diagnosing issues related to the circulating pump or low system pressure.

Sensor Fault

Identifying faults indicated by the hot water or central heating temperature sensor neon.

Pump Protection

How the pump automatically operates to prevent sticking during idle periods.

Central Heating System Pressure

Checking and maintaining the correct water pressure for the central heating system.

To Shut Off the Boiler

Instructions for temporarily and long-term shutdown of the boiler.

Frost Protection Mode

How the boiler operates to prevent freezing in central heating and hot water modes.

Important Notes

Boiler Location

Recommended clearances and conditions for boiler installation and servicing.

Flue Terminal

Ensuring the external flue terminal remains unobstructed and its normal operation.

Mains Failure

How the boiler behaves during and after an electrical power interruption.

Additional Bathroom Fittings

Advice on selecting bathroom accessories compatible with mains water pressure.

Cleaning

Guidelines for cleaning the boiler's outer casing safely and effectively.

Servicing

Importance of routine annual servicing for efficient and safe boiler operation.

Gas Leak

Immediate actions to take if a gas leak or fault is suspected.

Electrical Supply

Requirements for the boiler's electrical connection and grounding.