Baxi Power HT - 3.3 SETTING THE MAXIMUM CENTRAL HEATING TEMPERATURE; 3.4 SETTING THE MAXIMUM DOMESTIC HOT WATER TEMPERATURE

79
912.199.3 - GB
ISTRUCTIONS PERTAINING TO THE USER
•
Press either of the keys to access the programming function;
the display will show the letter P followed by a number (program line);
•
press the keys until the display shows P1, referring to the time to be set;
•
press the keys to set the time; on the display, the letter P will start to ash;
•
press the key to save and exit the programming function;
020503_0700
Figure 3
3.2 SETTING THE TIME
- Press the key (2-gure 1) to set the central heating water temperature;
- Press the keys to set the temperature required;
- press either of the keys (1 or 10 - gure 1) to save and return to the main menu.
N.b – With the outdoor sensor connected, the key (2 - gure 1) can be used to shift the central heating curve.
Press the keys to decrease or increase the room temperature in the premises to be heated.
3.3 SETTING THE MAXIMUM CENTRAL HEATING TEMPERATURE
- Press the key (3-gure 1) to set the maximum domestic hot water temperature;
- Press the keys to set the temperature required;
- press either of the keys (1 or 10 - gure 1) to save and return to the main menu.
3.4 SETTING THE MAXIMUM DOMESTIC HOT WATER TEMPERATURE