Need help?Do you have a question about the Baxi POWER HT+ Series and is the answer not in the manual?
General| Model | POWER HT+ Series |
|---|---|
| Category | Boiler |
| Installation Type | Wall-mounted |
| Heat Exchanger Material | Stainless Steel |
| Warranty | 2 years |
| Fuel Type | Natural Gas |
| Control System | Integrated Control |
| Ignition Type | Electronic |
Provides essential safety guidelines for installers and end users regarding appliance operation and hazards.
Offers important advice for safe operation, maintenance, and warranty compliance.
Defines responsibilities of manufacturer, installer, and user concerning appliance installation and use.
Explains hazard symbols and informational icons used throughout the manual for user safety.
Details the meaning of symbols found directly on the boiler for identification and safety.
Lists relevant European directives and regulations the product complies with.
Provides detailed technical data, including heat output, efficiency, and consumption figures.
Details the physical dimensions and connection points for various boiler models.
Illustrates the electrical wiring and connections for different boiler series.
Provides a high-level overview of the boiler's key characteristics and features.
Explains how the boiler functions, including gas/air mixing and circulating pump operation.
Identifies and describes the primary internal components of the boiler models.
Details the control panel interface, including keys and symbols for operation.
Lists the items included in the standard package when purchasing the boiler.
Refers to available accessories and optional features for the boiler system.
Specifies that installation must be performed by qualified professionals following local regulations.
Outlines necessary requirements for water treatment, gas supply, and electrical connections.
Provides guidance on selecting an appropriate installation site, including ventilation and space needs.
Details the procedures for safely transporting and unpacking the boiler unit.
Illustrates the hydraulic connections for a boiler with a domestic hot water tank.
Shows the hydraulic connections for a boiler integrated with a solar hot water system.
Depicts cascade system configurations with domestic hot water and multiple heating circuits.
States that installation must comply with prevailing regulations, codes of practice, and manual recommendations.
Provides step-by-step instructions for opening the boiler to access its internal parts.
Details the procedures for connecting the heating circuit, expansion vessel, and condensate pipe.
Explains the correct procedure for connecting the gas supply to the boiler unit.
Covers classification and recommendations for air and flue gas pipe configurations.
Outlines recommendations and procedures for making safe electrical connections.
Describes the process of filling and venting the heating system after installation.
Final steps to complete the installation, including reconnecting panels and disposing of packaging.
Defines commissioning as the first-time setup or post-prolonged shutdown procedure.
Provides a comprehensive checklist of items to verify before starting the commissioning process.
Details the step-by-step process for commissioning the boiler, including gas and electrical checks.
Covers essential gas settings, including fan speed and air/gas ratio adjustments.
Explains how to navigate and modify user and installer parameters via the control panel.
Details the procedure for safely starting the boiler after installation or shutdown.
Provides instructions on how to properly stop or put the boiler into standby mode.
Explains the boiler's frost protection feature and how to activate it.
Describes special functions like manual control, chimney sweep, and deaeration.
Provides an overview of accessible parameters via shortcuts and information menus.
Guides users through setting various parameters like date, time, language, and operating modes.
Explains how to access and navigate the information menu to view boiler data.
Recommends regular inspection and servicing by qualified professionals for safe operation.
Details routine maintenance tasks, including annual service and component checks.
Provides instructions for safely replacing fuses in the boiler's electrical terminal blocks.
Lists and explains various error codes displayed by the boiler, with steps for resolution.
Describes how to access the boiler's error log for diagnostic purposes.
Explains how certain error codes are automatically cleared when the cause is resolved.
Provides a procedure to manually clear persistent error codes after resolving the issue.
Outlines the steps for safely switching off and disconnecting the boiler.
Details the steps required to safely restart the boiler after decommissioning.
Offers practical tips for optimizing energy efficiency and reducing consumption.
Discusses the impact of room thermostats on energy consumption and recommended settings.
Thanks the customer for their purchase and recommends regular inspection and maintenance.
Details the warranty provisions, exclusions, and conditions for the appliance.
To Next Page
