Baxi POWER HT+ Series User Manual

Error 162:Air pressure switch
The error 162:Air pressure switch signifies that the flue gas differential
pressure switch has been triggered several times over the last 24 hours.
Check that the air inlet and combustion products discharge pipes are not
blocked. Unblock these if necessary.
After this procedure, proceed as follows to restart the boiler:
1. Unclip the HMI by hand then remove it from its support: pull firmly on
the slots at the bottom of the HMI.
2. Press the red button RESET on the boiler for 1 second using a
pointed object.
3. Clip the HMI back onto its support.
12.2 Accessing the error memory
1. Press the
MENU
key to access the parameters.
Fig.196
1
MW-4000273-2
Fig.197
MW-4000274-2
1"
2
Fig.198
MW-4000275-2
3
Fig.199
MW-3000052-EN-02
MENU
14:13
1.5 ba
r
18. Februar
y
2014
Tuesda
y
MENU
12 Troubleshooting
7702630 - v02 - 11082018 POWER HT + 129

Baxi POWER HT+ Series Specifications

General

Model	POWER HT+ Series
Category	Boiler
Installation Type	Wall-mounted
Heat Exchanger Material	Stainless Steel
Warranty	2 years
Fuel Type	Natural Gas
Control System	Integrated Control
Ignition Type	Electronic