Baxi POWER HT+ Series - Settings; List of Parameters

10 Settings
10.1 List of parameters
10.1.1 Shortcuts menu
Tab.37 Functions accessible with the shortcut key
Parameter Description Adjustment range
Standby/operation Boiler standby/Start-up. Standby : Boiler put on standby.
The symbol is displayed.
The boiler's operating modes are deactivated.
The frost protection function is activated.
On : Putting the boiler into operation
316:Hot water boost Forcing domestic hot water pro
duction.
On :
Activates the domestic hot water override.
The symbol is displayed.
If a domestic hot water tank is connected to the
boiler circuit, the boiler will give priority to forcing
heating of the DHW tank, independently of the oth
er parameters.
Off : Deactivates forcing of domestic hot water.
Central heating mode CH1 Boiler operating mode. On :
The heating is activated in Comfort mode.
The symbols ,
1 2 3
and are displayed.
Reduced:
The heating is activated in Eco mode.
The symbols ,
1 2 3
and are displayed.
Timed :
The heating operates according to the defined tim
er programs.
The symbols and
1 2 3
are displayed.
Off :
The boiler is shut down and frost protection is ac
tive.
The symbol is displayed.
Room temperature CH1 Room temperature set point in
comfort mode.
Hot water heating Setting domestic hot water pro
duction.
On : Enables domestic hot water production.
Off :
Disables domestic hot water production.
The symbol disappears from the display.
Eco : Not used.
Hot water temp setpoint Domestic hot water temperature
set point.
10.1.2 Information menu
Tab.38 Information menu
Information Description Unit
Room temperature Is displayed if the control system unit is configured as a room
temperature appliance
Room temperature min
Room temperature max
Boiler temperature Boiler flow temperature °C
Outside temp Outdoor temperature °C
10 Settings
7702630 - v02 - 11082018 POWER HT + 77