11
7 PARAMETER PROGRAMMING
WE RECOMMEND THAT YOU WRITE DOWN ALL THE PARAMETERS YOU CHANGE AT THE BACK OF THIS
MANUAL.
Menu key
The procedure for accessing the four menus to
program the boiler is as follows:
• from the main menu C.
• A and C (hold down for around 6 seconds)
menu 1-2-3-4 (see the figure opposite and the key).
• C press several times to go back one menu at a time
to the main menu.
1
End user
3
Specialist
2
Commissioning
4
OEM
To Next Page
Loading...
