Need help?Do you have a question about the Baxi Sirius FS 90-105-130-160 and is the answer not in the manual?
General| Max working pressure | 3 bar |
|---|---|
| Type | Floor Standing |
| Fuel Type | Natural Gas |
| Heat Output (kW) | 90 / 105 / 130 / 160 |
| Ignition | Electronic |
Essential steps before installing the boiler, including system cleaning.
Pre-commissioning checks for proper boiler operation and compliance.
Steps for correctly lighting the burner and making control panel adjustments.
Procedure for filling the heating system and checking pressure.
Instructions for safely shutting down the boiler by disconnecting power.
Guidance on system draining, antifreeze, and frost protection function.
Recommendations for annual servicing and gas type conversion.
Remarks and instructions for installers on faultless installation and compliance.
Pre-installation checks and required components for installer.
Guidelines for boiler placement, levelling, and utility connections.
Requirements for connecting the boiler to the flue system.
Electrical safety, wiring, and terminal block access for installation.
Procedures for adjusting gas valves for optimal combustion.
Guide for qualified staff to modify boiler operating parameters.
Explanation of safety thermostats, flame detector, and other control features.
Instructions on correctly positioning the ignition and flame sensing electrodes.
How to measure flue temperature, O2/CO2, and CO concentration.
Procedure to activate the function for combustion efficiency checks.
Essential checks for maintaining peak boiler efficiency annually.
Diagram illustrating the internal components of the boiler.
Detailed wiring diagrams for FS 90-105 and FS 130-160 models.
Specifications, performance data, and dimensions of the boiler models.
To Next Page