Baxtran BR90 - Zero; Tare; Pre Tare Function; Tare Function

31
ENENUSER’S MANUAL BR80-BR90
8. ZERO
Whentheweightisstable,press key for two seconds to set the zero point and zero the display. The status LED is turned on.
9. TARE
9.1 PRE TARE
Press key,settarewith and key,thenpress key.
The input data is tare. The status LED is turned on.
Press the key again to remove the default value.
9.2 TARE
Press briefly(<2s)totarematerialontopoftheplate,asmanytimesasnecessary.
10. MANUAL WEIGHT ACCUMULATION
Whenweightisstable,press key to accumulation the current weight to the total weight. The total number of accumulation will be
displayed for
n 12
1.5 seconds.
Pressing the keywillindicatethetotalweight,firstthe3firstdigitsH,andthenpress again,thenxand again to
continue accumulating.