Need help?Do you have a question about the Baxtran SAN and is the answer not in the manual?
Sets the zero point for all subsequent weighing operations. The display shows "0".
Tares the scale by storing the current weight as a tare value, subtracting it from subsequent measurements.
Used in conjunction with the "T" key to change the weighing unit (e.g., kg or lb).
Allows the user to set the zero point at any time, crucial for accurate weighing. Includes automatic rezeroing.
Explains how to tare the scale, storing container weight and displaying net weight.
Describes how to change the weighing unit (kg or lb) by pressing specific keys together.
Instructions on how to enter the scale's setting mode by holding a key during startup.
Step-by-step guide to calibrate the scale using known weights.
Details how to change the scale's maximum weighing capacity.
Explains how to adjust the display resolution for weighing.
Instructions for checking the scale's internal counting values.
Describes how to configure the automatic power-off feature.
Indicates the scale was outside the normal zero setting range.
Suggests a potential fault with the load cell or electronics.
To Next Page
General
