13
Maintenance
Dosing pump hose replacement
MAINTENANCE PLAN
Weekly check
– Make sure you keep your lter system in perfect condi-
tion.
– After adding fresh water, check the salt content and add
salt if necessary.
– Check the values for pH and chlorine, preferably with a
BAYROL Technik Electronic Pool Tester.
– Carry out a visual inspection of the system for leaks in all
components, lines and hose
Yearly maintenance
– Replace the pH sensor and calibrate it.
– Replace the Redox-sensor and set the correct setpoint
mV. Make sure that the chlorine level in the pool water is
at the desired level.
– Replace the dosing pump hoses.
– Check the pH injection valve and replace, if necessary.
Please note
Only use original BAYROL Technik components. The use
of third-party components can lead to malfunction during
operation. BAYROL Deutschland GmbH disclaims all
liability and warranty for this.
38
To Next Page
Loading...