11
DISASSEMBLING THE BUNK BED
NOTE: The bunk bed can be separated into one twin and one full size bed. In this case,
attach 4 floor protectors (HH) onto the bottom of the posts of the upper headboard (C)
and the upper footboard (D). Guardrails are not necessary.
16. To convert the bunk bed back into one twin and one full size bed, first unscrew the bolts to remove the
ladder and all guardrails.
17. Have an assistant help to remove the upper bunk from the lower bunk.
18. Attach four floor protectors (HH) onto the bottom of the upper bunk posts, as shown in the illustration. The
beds can now be placed in the desired locations.
C D
HH
C
D
A
B
To Next Page
Loading...
