40
DIAGNOSTICS
Determine if Bill Acceptor has power:
Turn game ON—The bill acceptor should make noise as stacker cycles and
green lights on outside bezel should flash.
If NO power:
Use meter to measure 110 AC voltage at cable going into Bill Acceptor from
power strip.
ERROR CODES
Bill Acceptor Diagnostics
Note: There are many different models and brands of Bill Acceptors that are used on
redemption games. Your Bill Acceptor may differ from the unit shown.
Standard DBA is MEI # AE2451-U5E Part # A5AC9091
BILL ACCEPTOR
To Next Page
Loading...