Need help?Do you have a question about the BBE DS48 and is the answer not in the manual?
General| Brand | BBE |
|---|---|
| Model | DS48 |
| Category | Computer Hardware |
| Language | English |
The 2x20 backlit LCD displays the program and programming choices of the unit.
These buttons allow navigation for selection of sub-menus and some parameter values.
Accesses front panel programming to select program, call up, edit or save.
Accesses front panel programming to adjust program parameters with <Back/Next> buttons.
Writes the current selection to memory.
Exits the programming menu and returns to the selected program display.
FREQ, Q, and GAIN knobs adjust parameters and values on the unit.
Display the levels of the four inputs using seven LED lamps per display.
Accepts a standard IEC type AC bayonet plug. Features universal switching power supply.
Configure gain, polarity, delay, and high/low pass filter settings for each output.
Sets parameters for five bands of parametric EQ per output channel. Includes Frequency, Q, and Gain.
Limits signal to output stage and amps to a predetermined maximum level.
Window for gain adjustment and routing assignment for the four inputs to eight outputs.
Sets output gain, Mute, and 180° polarity. Also allows output routing.
Opens the Delays window for setting delay values for each output in milliseconds, feet, or meters.
Sets parameters for each output channel: Attack, Hold Time, Decay, and Threshold.
Each tab selects an output channel for programming crossover, filter type, and parametric EQ's.
Sets low and high frequencies, filter types, and slopes for the crossover.
To Next Page