BBE DS48 - DS48 Features

iv
DS48 FEATURES
• 4 inputs 8 outputs and includes 10 configurations
• Choice of Operating and Crossover Modes: 4 X 2-way, 2 X 3-way + 2 Aux,
2 X 4-way, 1 X 5-way + 3 Aux, Mono Dist., Stereo Dist., LCRS w/Mono
Subs, 4 X 4 Processor, Muted/Flat Startup
• Input gain control for each channel
• Separate crossover controller
• 5 band fully parametric equalizer
• Driver Alignment Delay for each output up to 7ms in .1ms increments
• Output gain and phase control
• Three front panel encoders to speed programming
• Security lockout to discourage system tampering
• RS-232 remote control PC interface (Windows compatible software
included)
• Each group parametric equalizer has 360 ISO frequencies with + or -
12dB gain
• Each group Q value is from 0.5 to 128 and provides Hi shelf/Lo shelf
select function.
• Separate limiter with Attack, Hold, Decay and Threshold parameters
• High Pass and Low Pass filter avail for each channel @ 6 or 12dB slope
• Choice of 6dB, 12dB,18dB, 24dB, 48dB Butterworth, Linkwitz-Riley or
Bessel frequency response curve
• Memory for up to 30 on-board user programs
• 8X7 bit input/output precision digital LED meter.
• 2X20 LCD backlit. LED Display
Crossovers
Parametric
Equalizers
Driver
Alignment
Delay
Speaker
Protection
limiter
10 user
memories