BBE MAXCOM - Maxcom Specifications; Audio Input; Audio Output; Compressor Section

MAXCOM SPECIFICATIONS
AUDIO INPUT
Type ………………………………Active balanced XLR and 1/4” jack
Impedance …………………………60k ohm balanced
Maximum input level ……………+21 dBu balanced and unbalanced
AUDIO OUTPUT
Type ………………………………XLR and 1/4” jack
Impedance …………………………1K ohm unbalanced
Maximum output level ……………+21 dBu
Frequency response ……………20Hz to 20KHz
THD N% @ 1kHz, 4dBu …………0.05%
IMD (SMPTE) @ 10dBu …………0.01%
Noise & Hum unity gain …………93dBu
Noise & Hum, fully off ……………97dBu
Crosstalk @ 20kHz ………………85dBu
CMR @ 1kHz ……………………60dB
COMPRESSOR SECTION
Type ………………………………Interactive Compressor
Threshold …………………………Variable from -40dB to 20dB
Ratio ………………………………Variable from 1:1 to LIM
Attack ……………………………Variable from 0.1ms to 200ms
Release ……………………………Variable from 0.05s to 4s
GATE SECTION
Type ………………………………Interactive Expander/Gate
Threshold …………………………Variable from OFF to 15dB
SONIC MAXIMIZER SECTION
POWER SUPPLY …………………………AC 115V/230Vac 60/50Hz; DC 24V
DIMENSIONS ……………………………483mm (W) x 217mm (D) x 44mm (H)
19.01˝ (W) x 8.54˝ (D) x 1.73˝ (H)
WEIGHT ……………………………………3kg (6.61lb)
SPECIFICATIONS
iii