BBE Sonic Maximizer 882i - Specifications

14
SPECIFICATIONS
Frequency
Response
process mode Program controlled
bypass mode 10Hz to 50kHz +/-0.5dBu, 0dBu input
THD
process mode less than 0.025% at -10dBu input, 20-20kHz
bypass mode less than 0.002% at -l0dBu input, 20-20kHz
Maximum Output
+23dBu (may vary due to control settings)
Input Impedance
14.7k Ohms, balanced 1/4” TRS phone jack or
XLR jack Pin #2 hot or “+”
Output Impedance
600 Ohms, balanced 1/4” TRS phone jack or
XLR jack Pin #2 hot or “+”
Sensitivity
-45dBu for maximum process
Maximum Process
+12dBu boost at 5kHz, 0dBu input
Lo Contour
+12dBu boost at 50Hz, 0dBu input
Power
Requirements
U.S., Canada and
Japan models
100-120VAC, 50/60Hz, 8 WATTS
220-240 models 220-240VAC, 50/60Hz, 8 WATTS
Fuse
For all models, replace with 250VAC,
.2A slowblow type fuse.
Dimensions
19”(W) x 5.5”(D) x 1.7”(H)
Shipping Weight
6.5 lbs.
* 0dBu = 0.775mVrms
Note: Due to continuing product improvement, specications and design are subject to change without notice.