bca FLOAT E2-25 - Correct Attachment and Setting; Adjusting the Trigger Handle Height

USER MANUAL / ENGLISH
9
WARNING: DO NOT TWIST THE AIRBAG, DO NOT CROSS THE HOOKS, DO NOT ROLL THE AIRBAG, DO NOT BLOCK THE AIRBAG.
WARNING: The compressor compartment must remain closed to prevent objects from being sucked into the compressor and blocking inflation of the
airbag.
10 CORRECT ATTACHMENT & SETTING
Your pack should be properly fitted before you head into avalanche terrain. The forces of an avalanche can rip the pack from your back if it is not
secured to your body. Put the backpack on and adjust the shoulder straps to fit your body. Always fasten waist belt, sternum and leg strap and fit
them according to your body.
WARNING:The waist belt and leg strap must be fastened for the system to function.
DEFLATING AND RE-FOLDING THE AIRBAG
1. STERNUM STRAP
2. WAIST BELT
^^^^
^^^
^
^^^^^^^
^
1
2
1. STERNUM STRAP
1 2 3
2. WAIST BELT
1 2 3
HOW TO ADJUST THE TRIGGER HANDLE
1 2 3
Adjust the height of the trigger handle on the shoulder strap. There are
three dierent settings. The trigger handle should ideally be at chest
height.
Turn up the trigger handle
to change the height
position.
Then slide the trigger handle out of the webbing
loop according and slide it back at the correct
height.
3. LEG STRAP
3
3. LEG STRAP
1
2
3