What to do if the bca FLOAT E2 Accessories autotest does not complete?
If the BCA autotest doesn't complete, make sure that ice or snow isn't blocking the compressor wheel. It's also important to dry the system completely before using it again.
How to fix the bca FLOAT E2 Accessories airbag that doesn’t inflate when pulling trigger?
If the BCA airbag doesn’t inflate when you pull the trigger: * First, check if the E2 is on by looking at the LED. * Next, see if the supercapacitors are charged enough; the LED should be orange or green. * Finally, check the LED to see if the autotest is okay.
General| Hydration Compatible | Yes |
|---|---|
| Ski Carry | Yes |
| Snowboard Carry | Yes |
| Airbag Volume | 150L |
| Refillable Cylinder | Yes |
| Harness Type | Adjustable |
| Dimensions | 50 x 30 x 20 cm |
| Material | Nylon |
| Type | Avalanche Airbag Backpack |
| Bluetooth Version | No |
| Charging Time | Not Applicable |
| Color Options | Black, Red |
To Next Page
