USER MANUAL / ENGLISH
13
15 ADDITIONAL INFORMATION
PRODUCT DESCRIPTION SPECIFICATIONS
Type: Float E2 Airbag system backpacks
Operating Temperature: - 30°C / + 40°C
IP65 conform controller
Alpride SA Patent No: EP3202462
Weight of complete E2 SuperCap kit (without batteries): 1 140 g +/- 10 g
Airbag balloon volume : 162 liters
Total volume of the complete airbag kit in backpack: 1.8 litres
USB-C: 5 V – 3A DC
Batteries: 2 batteries AA / R6 / UM3 1.5 V Alkaline or Lithium
Certification: CE according to EN 16716 standards set by TÜV Süd GmBH
Model: Float E2 Airbag
SERVICE CENTER
The Float E2 Airbag system customer service center for the different countries are listed under
our website: https://backcountryaccess.com/services/float-resources/
16 SALES & HOMOLOGATION
SALES
Responsible for the development and commercialization in the EU and worldwide is:
Backcountry Access Inc. (BCA) and Alpride SA, Chemin des Chômeurs 2, 2523 Lignières, Switzerland
All information related to importers is available at www.backcountryaccess.com
HOMOLOGATION
All declarations of conformity are available at https://backcountryaccess.com/services/float-resources/
Tested by TÜV Süd Product Service GmbH, Daimlerstr. 11, 85748 Garching bei München, Germany. Prüfstellennummer 0123.
Certified according to: EN 16716: 2017
The Float E2 Airbag comply with the provisions and safety requirements of the European Standard EN 16716: 2017 for Mountaineering equipment
– Avalanche airbag systems – Safety requirements and test methods.
All homologated backpacks are labelled with corresponding seals indicating they have passed the official tests. They are affixed in plain sight and
may not be removed.
WARRANTY
The manufacturer, Backcountry Access, Inc. (BCA), expressly warrants the workmanship and components of this product for three years after
the date of retail purchase. All parts will be either repaired or replaced free of charge, including labor, by the manufacturer. This warranty does
not cover damage to the product caused by improper use or excessive wear and tear. Direct all warranty claims to BCA or your airbag retailer. All
claims must include proof of purchase and a return authorization number.
For additional warranty information, please visit: www.backcountryaccess.com/warranty
The labels contain the following
Name of the model of the product.
Warning ! The end user should carefully read the instruction before using the product (PPE).
Manufacturing date : Year-Month / Individual serial number.
The CE marking ensures compliance with the essential requirements of Regulation EU 2016 / 425.
Eurasian Conformity Mark.
UKCA Certification.
The EU declaration of conformity can be accessed on https://backcountryaccess.com/services/float-resources/
Reference for Personal Protective Equipment that is in compliance with the European
harmonized technical standard used in the design and CE certification.
WWW.BACKCOUNTRYACCESS.COM
XXXXXX
EN16716:2017
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
To Next Page
Loading...
