8 |
SETTING UP THE APPLIANCE
1. Remove all packaging and accessories. Inspect appliance to make sure it is in good condition.
2. Rinse accessories and attachments with warm water. Allow parts to dry.
3. Wipe exterior of unit with a damp cloth and allow to dry.
4. Insert the rubber seal ring into the slot in the lid.
5. Place appliance on a stable and level surface and arrange so it is at least 12 inches away from other
kitchen appliances.
PRODUCT ASSEMBLY
Attach the knob to the glass lid
with a part 1 screw.
UNDERNEATH
2
1
3
A
B
C
To Next Page
Loading...