ADJUSTING TILT
• Push fan guard up and down to adjust tilt.
TROUBLESHOOTING
Reason
Cord unplugged
Overheating
Dirty fan blades
Problem
Fan vibrates
Fan excessively noisy
Fan not working
Solution
Plug in
Clear obstructions and wait for motor to cool
Low voltage
Blown fuse/circuit breaker tripped Replace fuse, or reset breaker
Ensure there is proper voltage in outlet
Clean fan blades
Loose fan blades Tighten fan blades
Uneven surface Place on level surface
CLEANING
1. Pull the power cord from the outlet.
2. Remove front guard.
3. Wipe down blades with a soft cloth and mild detergent.
4. Wipe down front/rear guards with a soft brush and mild detergent.
Do not clean with gasoline, benzene or thinner, or other hazardous liquids/abrasives.
Pg. 10
To Next Page
Loading...