BCP SKY4719 - Customizing Robot Settings; Setting Current Day and Time; Setting Cleaning Schedule; Setting Water Seeping Speed

| 11
SETTING CLEANING SCHEDULE
1) While in standby, press the TIMER button and then press the SPOT button.
2) Press the LEFT/RIGHT buttons to toggle through the days of the week (1 represents Monday and 7
represents Sunday).
3) Hold the UP button to select a day. Hold the DOWN button to cancel a selected day.
4) Press START/STOP to save and continue to setting the time.
5) Press the LEFT/RIGHT buttons to switch between hour and minute.
6) Press the UP/DOWN buttons to increase/decrease the hour or minute.
7) Press START/STOP to save the settings.
SETTING WATER SEEPING SPEED
1) While in standby, press the TIMER button and then press the WALL button. The seeping speed
indicator light will flash.
2) Press the UP button to set normal water seeping speed, which is suitable for hardwood floors or
relatively clean floors. The indicator light will go solid and the screen will display “1111.”
3) Press the DOWN button to set fast water seeping speed, which is suitable for tile/marble floors or
very dirty floors. This indicator light will turn o and the screen will display “0000.”
4) Press the START/STOP button to save the settings.
SETTING CURRENT DAY/TIME
1) While in standby, press the TIMER button and then press the TURBO button.
2) Press the LEFT/RIGHT buttons to toggle through the days of the week (1 represents Monday and 7
represents Sunday).
3) Hold the UP button to select a day. Hold the DOWN button to cancel a selected day.
4) Press START/STOP to save and continue to setting the time.
5) Press the LEFT/RIGHT buttons to switch between hour and minute.
6) Press the UP/DOWN buttons to increase/decrease the hour or minute.
7) Press START/STOP to save the settings.