ERROR CODES
PROBLEMERROR CODE
SOLUTION
E001
Cannot detect ground
Suction inlet blocked
Left/right wheels not working
Side brushes not working
Left/right wheels o the ground
Rolling brush not working
Low battery
Charging failure
Wall detection failure
Front bumper not in place
Battery not properly installed
Low water level
Clean the cli sensors or place unit on flat ground
Clean the sensor head or clear the inlet
Clean foreign objects from the wheels
Clean foreign objects from side brushes
Place the unit on flat ground
Clean foreign objects from rolling brush
Move the unit back to the charging dock
Turn on power switch or make sure battery is
properly connected
Clean the sensors
Push the front bumper into place
Reinstall battery
Remove water tank and refill
E002
E003
E004
E005
E006
E007
E008
E009
E010
E011
E012
NOTE: The unit will sound an alarm & display an error code when an error occurs.
18 |
To Next Page
Loading...