BCP SKY5296 - User Manual

Questions and Answers

R
Rebecca FloresAug 14, 2025
What to do if the 'add water' indicator is always on for BCP SKY5296 Ice Maker?
- J
  Jessica EvansAug 14, 2025
  If the add water indicator is always on, even when the BCP Ice Maker enters the ice-making process, but no water is flowing, there could be several reasons: * There is no water supply: Turn on the water, increase the water pressure, or clean the water hose. * The water level detector is not functioning: Clean the water tank and water level detector. * Water is leaking from the water tank: Ensure the unit is level. * Water is leaking from the drain hose: Reinstall the drain hose, increase water pressure, clean the water hose, or manually add water. * The water drain pipe is in the wrong position: Place the water drain pipe in the correct position.
A
Adam SnyderAug 17, 2025
Why are the ice cubes cloudy in my BCP SKY5296?
- J
  James Colon DDSAug 17, 2025
  If your BCP Ice Maker is making ice, but the ice cubes are cloudy, the issue is likely due to bad water quality. Try changing your water supply or filtering the water you are using.
U
ugonzalezAug 21, 2025
What to do if BCP SKY5296 cycle is normal but there are no ice cubes?
- J
  Jeremy FrederickAug 21, 2025
  If the ice making cycle of your BCP Ice Maker is normal but no ice cubes are being produced, it could be due to: * High ambient temperature: Move the unit to a location with a lower ambient temperature. * Water temperature too high: Switch to a colder water supply.
R
Robert AguilarAug 25, 2025
Why are the ice cubes from my BCP SKY5296 Ice Maker so thin?
- M
  Margaret AshleyAug 25, 2025
  If your BCP Ice Maker is producing thin ice cubes, this could be due to: * High ambient temperature: Move the unit to a location with a lower ambient temperature or increase the ice-making time. * Bad air circulation: Place the unit at least 8 inches away from the wall.
J
Jeffrey BrownAug 27, 2025
Why are the ice cubes from my BCP SKY5296 irregular?
- L
  Linda NielsenAug 27, 2025
  If your BCP Ice Maker is producing irregular ice cubes, it could be due to: * Bad water quality or a dirty water tank: Change the water supply, filter the water, or clean the water tank. * Clogged water seeping pipe: Clean the holes on the water seeping pipe.
W
William KochAug 30, 2025
What to do if the water pump is not working in my BCP SKY5296?
- P
  Penny CruzAug 30, 2025
  If the water pump in your BCP Ice Maker is not working, a foreign object in the water tank might be obstructing the pump. Clean the water tank and the pump to resolve this issue.
D
Donna SchwartzSep 3, 2025
What to do if pump is working but there is no water flow from water seeping pipe in BCP SKY5296 Ice Maker?
- K
  Katherine MeyerSep 3, 2025
  If the pump in your BCP Ice Maker is working, but there is no water flow from the water-seeping pipe, the water-seeping pipe is likely clogged. Clean the holes on the water-seeping pipe.
E
Edward HolmesSep 6, 2025
What does it mean when the 'full' indicator is on for my BCP Ice Maker?
- S
  Stephen DuranSep 6, 2025
  If the 'full' indicator is on for your BCP Ice Maker, it means the ice bin is full. Remove the ice cubes to resolve this.
M
Matthew FisherSep 9, 2025
Why are the ice cubes from my BCP SKY5296 Ice Maker so thick?
- Z
  zdodsonSep 10, 2025
  If your BCP Ice Maker is producing thick ice cubes, it could be due to a low ambient temperature. Try reducing the ice-making time.