| 7
SETTING UP THE ICE MAKER
USAGE TIPS
5. Remove the plug from the water outlet. Attach one end of the part C drain hose to the water outlet
and attach the other end to your water drainage pipeline.
NOTE: Pull the water drain pipe out from within the ice maker to manually drain water.
6. Plug the power cord into a wall outlet.
NOTE: If manually filling with water, skip to step 5.
1. Remove the locking ring from the water inlet. Compress the plug, then remove it.
2. Insert the part B water hose into the water inlet and secure it by replacing the locking ring.
• Connect to a potable water supplying only. Only use drinking water.
• Dirty or unfiltered water will result in low-quality, cloudy ice cubes.
• Ice maker may make unfamiliar and loud sounds while operating.
• The ice maker requires a continuous water supply with pressure 1-8 bar.
• The temperature of the water feeding into the ice maker should be between 41°F and 77°F for proper operation.
• It is recommended that you discard the first batch of ice.
A
B
B
3. Screw the part A faucet adapter onto the water faucet. Remove the locking ring.
4. Insert the other end of the water hose into the faucet adapter and secure it by replacing the locking ring.
To Next Page
Loading...