HARDWARE
1
4 PCS
NUT CAP AND
WASHER SET
16mm HEX SCREW
2
4 PCS
3
2 PCS
NUT AND
BOLT SET
25mm BOLT,
SPRING WASHER,
WASHER SET
4
6 PCS
SMALL SCREW
5
1 PC
TOOLS REQUIRED
APPROXIMATELY
30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
500 LBS
CAPACITY
LBS
Pg. 3
NOTICE
• Do not load more than 500 pounds on this product.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTE: All required hardware comes attached to the parts. During assembly, you will be instructed to
remove and replace hardware in order to secure parts.
Please retain these instructions for future reference.
SOCKET
WRENCH
14MM
SOCKET
14
ALLEN WRENCH
(PROVIDED)
To Next Page
Loading...
