Pg. 5
PRODUCT ASSEMBLY
Remove the four part 2 hex screws from
the cushion, then attach the brackets to
the cushion by replacing the hex screws.
Slide the short/long legs through the legs
and reattach them to the brackets by
replacing the nut and bolt sets.
Remove the part 3 nut and bolt sets from the
part C small leg and part D long leg, then remove
the short/long legs from the brackets.
Remove the six part 4 bolt sets from
the underside of the part E cushion.
Attach the legs to the cushion by
replacing the bolt sets.
2
4
3
2
2
x6
C
E
D
To Next Page
Loading...
