The engine fails to reach its maximum power
Engine overloaded Engage a lower gear or reduce the load
Air filter clogged Clean the air filter
Implement badly regulated Consult the implement instruction manual
Call the Lombardini assistance service if you are unable to find the cause of a fault.
Fault Cause Remedy
No current in the electrical circuit
Main fuse damaged Replace the fuse
Discharged battery Recharge or replace the battery
Tarnished battery terminals
Clean the terminals and smear Vaseline grease
over them
The battery fails to recharge (red alternator
indicator light on with the engine running)
Worn or loosened alternator belt Check the belt stretcher. Replace the belt if worn
Faulty alternator Contact your area dealer
Faulty electrical system Contact your area dealer
Faulty battery Replace the battery
Call your area dealer if you are unable to find the cause of a fault.
Fault Cause Remedy
The hydraulic circuit fails to function correctly
Oil level low Top up the circuit
Oil filter element clogged Replace the filter
Faulty hydraulic circuit Contact your area dealer
The hydraulic oil overheats
Oil level too high or low Top up the oil level
Oil filter element clogged Replace the filter
Faulty hydraulic control valves Contact your area dealer
Call your area dealer if you are unable to find the cause of a fault.
GB
To Next Page
Loading...
