Fault Cause Remedy
The implement fails to lift
The implement is heavier than the maximum
capacity of the power lift
Unhitch the implement.
Before hitching another implement, make sure
that its characteristics are compatible with those
of the tractor
Transmission oil level low Top up the oil level
Oil pressure too low Contact your area dealer
Hydraulic pump damaged Contact your area dealer
The implement lowers too fast
The lowering governor valve is not closed to a
sufficient extent
Adjust the valve with the knob to obtain the best
speed
The implement lowers too slowly
The lowering governor valve is not open to a
sufficient extent
Adjust the valve with the knob to obtain the best
speed
Call your area dealer if you are unable to find the cause of a fault.
Fault Cause Remedy
The clutch fails to release correctly (the gears
are difficult to engage)
Clutch incorrectly regulated Use the adjuster nut
The clutch is worn Contact your area dealer
Call your area dealer if you are unable to find the cause of a fault.
Fault Cause Remedy
The tractor fails to brake correctly
Brakes incorrectly regulated Contact your area dealer
Worn brake lining Contact your area dealer
The hand brake fails to brake correctly Hand brake incorrectly regulated Contact your area dealer
Call your area dealer if you are unable to find the cause of a fault.
GB
To Next Page
Loading...
